You may save procedure parameters in different windows.
1. Open the procedure sequence.
2. Make the desired settings.
3. In the procedure sequence, click the 
Save procedure parameters symbol.
The Save: Procedure parameters window opens.
4. Make the desired changes:
|
Element |
Description |
|
Procedure sequence |
Saves all procedure steps. |
|
General procedure settings |
Saves the settings under Calculate > General procedure settings. |
|
Procedure variables |
Saves the procedure variables of all procedure steps, |
5. Confirm with OK.
6. Select the desired file or enter path and file name.
7. Click the Save button.
The procedure sequence and the procedure parameter settings are saved to the selected parameter file.
|
Tip: Alternatively, to save procedure parameters, go to File > Save file as > Procedure parameters or Calculate > General procedure settings > Save button. |
Saving marked procedures
You can also mark procedures in the sequence and save only those.
1. Open the Procedure sequence.
2. Mark the procedures that you want to save.
3. Right-click your selection.
4. Click Save marked procedures.
The Save: Procedure parameters window opens.
5. Make the desired changes:
|
Element |
Description |
|
Procedure sequence |
Saves the selected procedure steps. |
|
General procedure settings |
Saves the settings under Calculate > General procedure settings. |
|
Procedure variables |
Saves the procedure variables of the selected procedure steps. |
6. Confirm with OK.
7. Select the desired file or enter path and file name.
8. Click the Save button.
